Skip to content
-
-
-
- Ghost Gunner
-
$22.99
- Custom carbide #34 drill bit (0.110″ diameter x 1-1/8″ LOC x 2-1/4″ OAL) for use with Ghost Gunner M1911 milling program.
- Add to cart
-
-
-
-
-
-
- Ghost Gunner
-
$8.00
- Spare nylon printed bolt catch inserts for use with the Ghost Gunner Zero Percent AR-15 build.
- Add to cart
-
-
- Ghost Gunner
-
$25.00
- This buffer tower is sold without the lower lower and is intended to be used with 3D printed lower lowers. (Files can be found on the USB drive you received with your Zero Percent Starter Kit)
- Add to cart
-
-
- Ghost Gunner
-
$10.00
- 6061 billet aluminum AR-15 Buffer Tower block. This is for use with the Zero Percent Starter Kit on the Ghost Gunner 3, and results in a completed “Buffer Tower” for the AR-15 Zero Percent platform. *Please allow up to 8-12 weeks for delivery
- Add to cart
-
-
- Ghost Gunner
-
- This lower lower receiver is sold without the buffer tower ring and is intended to be used with buffer tower rings and upper lower receivers milled on the GG3 using the associated starter kits for those parts.
- Read more
-
-
- Ghost Gunner
-
$25.00
- 6061 billet aluminum AR-15 non receiver. This is for use with the Zero Percent Starter Kit on the Ghost Gunner 3, and results in a completed “upper lower” for the AR-15 platform. *Please allow up to 3 weeks for delivery
- Add to cart
-
-
-
- Ghost Gunner
-
$5.49
- Made in USA Ghost Gunners Front takedown jig piece for use with mil spec AR-15 and AR-308 80% lowers.
- Add to cart
-
-
-
- Ghost Gunner
-
$5.49
- 1/4″ collet used to secure tooling in Ghost Gunner CNC machines. For use with AR-15, AR-308, and M1911 milling programs. -
- Add to cart
-
-
- Ghost Gunner
-
$5.49
- 1/8″ collet used to secure tooling in Ghost Gunner CNC milling machines. For use with M1911 milling programs.
- Add to cart
-
-
- Ghost Gunner
-
$5.49
- 4 mm collet ER-11 used to secure 5/32″ drill. For use with Ghost Gunner AR-15, AR-308, and M1911 milling programs.
- Add to cart
-
-
-
- Ghost Gunner
-
$40.00
- Made in USA *Lead time is currently 8-10 weeks* Spare or replacement set of Fixture plates (2) for use with the Universal Clamps for G0 operations.
- Add to cart
-
-
- Ghost Gunner
-
$69.99
- *Lead time is currently 8-10 weeks* The G0 grip module is a SLS printed grip that the G0 chassis installs into, in order to complete the lower part of the G0 pistol. This product also includes the G0 Special Parts kit, a series of pins and springs required to secure the G19 LPK into the milled G0 chassis. These are: 1x rear…
- Add to cart
-
-
- Ghost Gunner
-
$80.04
- *Lead time is currently 8-10 weeks* This is a properly-sized steel block that can be machined on the Ghost Gunner 3 into the G0 zero percent pistol chassis. The G0 Starter Kit includes all the required machine tools, fixtures and code to perform the machining operations. Note: this block is for GG3-S owners with the hardware upgrade. GG3 owners without the hardware upgrade should…
- Add to cart
-
-
- Ghost Gunner
-
$59.99
- *Lead time is currently 8-10 weeks* This is a properly-sized 303 stainless steel block that can be machined on the Ghost Gunner 3 into the G0 zero percent pistol chassis. The G0 Starter Kit includes all the required machine tools, fixtures and code to perform the machining operations. Note: this block is for GG3 owners without the GG3-S hardware upgrade. It is…
- Add to cart
-
-
- Ghost Gunner
-
$5.54
- *Lead time is currently 8-10 weeks* The G0 Special Parts Kit contains all special lower parts required to assemble the G0 that aren’t already included in a standard G19-style Gen3 lower parts kit. These parts are: 1x rear FCG pin: 3mm diameter, 18mm long dowel pin 1x front FCG pin: 4mm diameter, 22mm long dowel pin 2x grip module pins: 3mm diameter,…
- Add to cart
-
-
- Ghost Gunner
-
$270.00 – $455.00Price range: $270.00 through $455.00
- Select options
This product has multiple variants. The options may be chosen on the product page
-
-
- Dealers, Ghost Gunner
-
$129.99
- The G80 Jig is designed to work with Glock-type modular fire control units like Polymer 80’s Spectre 2 80% Glock™ Fire Control Unit. It can be used manually with a press or with enhanced precision on the Ghost Gunner 3-S. Print your own grip module here.
- Add to cart
-
-
-
-
Sale!
- Ghost Gunner
-
$49.99 Original price was: $49.99.$39.99Current price is: $39.99.
- Scratch resistant and magnetic chip cover for GG3 and GG3-S.
- Add to cart
-
-
- Dealers, Ghost Gunner
-
$1,500.00
- Ghost Gunner 3 allows you to manufacture firearms with confidence and ease, in the privacy of your own home. It is sold with the cut codes for the AR-15, AR-.308, 1911, Polymer80 and AK-47 receivers and frames. GG3 is also compatible with aftermarket jigs and cut codes (including the AR-9 and skeletonization) and engraving software.
- Add to cart
-
-
- Dealers, Ghost Gunner
-
$1,750.00
- Made in USA Assembled in USA Upgrade your workshop and enhance your capabilities with the GG3-S! This product contains everything you need to begin performing your own pistol slide optic cuts. **Note: this GG3-S deposit will secure your spot in line for a GG3-S. You will be contacted after your order to pay your GG3-S in full.** This includes: GG3-S…
- Add to cart
-
-
- Dealers, Ghost Gunner
-
$299.00
- Upgrade your GG3 to a GG3-S and receive a 4x improvement in rigidity, improved chip management and several cosmetic and quality of life upgrades! Notice: this upgrade process requires shipping your GG3 to the Ghost Gunner factory. GG3-S Purchasing Information Purchasing this product will pay for parts and labor for the upgrade process; shipping calculated at checkout will pay for…
- Add to cart
-
-
- Ghost Gunner
-
$11.00
- Spare nuts and bolts used to mount an AR-15 80% lower and jig assembly to the Ghost Gunner Contains: 3 M4x45 mm bolts, 2 M4x20 mm bolts, 1 M4x80 mm bolt, 3 M4 nuts, 7 M4 washers, 3 M4 T-slot nuts, and grip bolt (1/4in x 1in). *AR-15 Jig Bolts are included with the purchase of an AR-15 Starter Kit.
- Add to cart
-
-
- Ghost Gunner
-
$48.00
- This jig has been made specifically for the Ghost Gunner CNC mill. It can be used with our mil-spec AR15 80% lowers to finish them. The jig features injection-molded mounting fixtures for completing 80% AR-15 receivers with the Ghost Gunner 1, 2, or 3 CNC mills. Comes with bolts and washers. Add the tooling kit for everything needed to complete…
- Add to cart
-
-
- Dealers, Ghost Gunner
-
$104.48
- Made in USA AR-15 Starter Kit includes all fixtures and tooling you need to complete an AR-15 80% lower receiver in the Ghost Gunner 1, Ghost Gunner 2, or Ghost Gunner 3 CNC mill. This jig WILL NOT work with any other system. It is ONLY for use in a Ghost Gunner CNC mill and nothing else. **Ships within 3…
- Add to cart
-
-
- Ghost Gunner
-
$11.00
- Spare nuts and bolts used to mount an AR-308 80% lower and jig assembly. Contains: 3 M4x55 mm bolts, 2 M4x20 mm bolts, 1 M4x80 mm bolt, 3 M4 nuts, 7 M4 washers, 3 M4 T-slot nuts, and grip bolt (1/4in x 1in). *AR-308 Jig Bolts are included with the purchase of an AR-308 Starter Kit.
- Add to cart
-
-
- Ghost Gunner
-
$52.00
- This jig has been made specifically for the Ghost Gunner CNC mills. It can be used with our 308 80% lowers to finish them. The jig features injection-molded mounting fixtures for completing 80% AR-308 receivers with Ghost Gunner 2 or Ghost Gunner 3. Comes with bolts and washers. Add the tooling for everything needed to complete 80% receivers with your…
- Add to cart
-
-
- Dealers, Ghost Gunner
-
$116.58
- Made in USA AR-308 Starter Kit includes all fixtures and tooling you need to complete an AR-308 80% lower receiver in the Ghost Gunner 2 and Ghost Gunner 3 CNC mill. This jig WILL NOT work with any other system. It is ONLY for use in a Ghost Gunner CNC mill and nothing else. **Ships within 3 weeks
- Add to cart
-
-
- Ghost Gunner
-
$34.99
- Custom carbide twist 5/32″ drill bit (2.5″ OAL, 1.5″ LOC) for use with the Ghost Gunner M1911 milling program
- Add to cart
-
-
- Ghost Gunner
-
$37.99
- Custom 1/4″ x 1-1/4″ LOC, 3″ OAL Solid Carbide End Mill. (When used for milling AR pattern 80% lowers, we have seen these maintain precision for between 8 to 10 lowers before needing to be replaced.)
- Add to cart
-
-
-
- Ghost Gunner
-
$16.50
- Spare nuts, bolts, and washers for M1911 jig assembly. Contains: 3 M4x16 bolts, 2 M4x20 bolts, 1 M3x20 bolt, 1 M5x25 bolt, 5 M4 washers, 5 M4 nylon washers, 1 M5 washer, 1 M3 washer, 4 t-slot nuts. *M1911 Jig Bolts are included with the purchase of an M1911 Starter Kit.
- Add to cart
-
-
Sale!
- Dealers, Ghost Gunner
-
$309.99 Original price was: $309.99.$297.00Current price is: $297.00.
- Made in USA Includes everything you need to get started milling an aluminum 1911 frame in the Ghost Gunner 2 or Ghost Gunner 3 CNC mill. This jig WILL NOT work with any other system. It is ONLY for use in a Ghost Gunner CNC mill and nothing else. **Please allow 6 weeks for delivery.**
- Add to cart
-
-
- Dealers, Ghost Gunner
-
$241.98
- Made in USA Precision machined delrin fixture for completing Polymer80 brand 80% PF940C Compact polymer frames. Includes all necessary bolts, and tooling. This jig WILL NOT work with any other system. It is ONLY for use in a Ghost Gunner CNC mill and nothing else. * Note: we do not currently ship lowers or jigs to residents of and persons in New Jersey.…
- Add to cart
-
-
- Ghost Gunner
-
$24.90
- Product made to order. Please allow up to two weeks shipping.
- Select options
This product has multiple variants. The options may be chosen on the product page
-
-
- Ghost Gunner
-
- Replacement probe block (1) for the Polymer 80 PF940C jig/starter kit. Also can be used for your own home made jig designs and codes. Please note there is a 3 to 4 week lead time on this item.
- Read more
-
-
-
- Ghost Gunner
-
$55.99
- This includes only the tooling and the collets necessary for use in the Ghost Gunner 2 CNC Machine. Tooling is for use with the AR15 and/or AR308 jigs. You can also purchase it at a discount on the specific jig page. The tooling includes one 1/4″ custom carbide end mill, one 5/32″ HSS drill bit, one 1/4″ collet, and one…
- Add to cart
-
-
-
- Ghost Gunner
-
$8.00
- 5/32″ HSS drill bit (2″ LOC x 3-1/8″ OAL) for use with the Ghost Gunner AR-15 and AR-308 milling programs -
- Add to cart
-
-
-
- Ghost Gunner
-
$34.99
- KNS Push-Button Pivot/Takedown Pins for completing your Zero Percent Build. These pins have a spring-loaded push button that, when pushed, retracts the stainless steel detents for easy pin removal. The steel housing has a black oxide finish. The button also has a drilled cross hole which allows for the installation of a seal wire to prevent tampering with the guns…
- Add to cart
-
-
-
-
- Dealers, Ghost Gunner
-
$192.00 – $390.00Price range: $192.00 through $390.00
- The Optic Cut Kit provides you with everything you need to perform an optic cut on your GG3 or GG3-S, including tooling and code. At launch, the GG3-S can perform RMR, RMS/RMSc, DOCTER and MOS footprints and cut Glocks, SIG P320 and 1911. Additional supported footprints and slides to follow.
- Select options
This product has multiple variants. The options may be chosen on the product page
-
-
- Ghost Gunner
-
$7.99
- This Add-On is for customers who purchased the Optic Cut Kit prior to November 2023, and have Universal Clamps running a GG3 or GG3-S. This add-on will allow you to mill SIG P320 + 1911 slides. Contents: P320-specific parallels (taller than normal parallels) 1911-specific soft jaws (thicker than normal soft jaws) *Currently up to 3-4 weeks for shipping
- Add to cart
-
-
-
- Ghost Gunner
-
$22.00
- Stub ball end mill (1/4″ dia, 2-flute) for use with the Ghost Gunner M1911 milling program
- Add to cart
-
-
- Dealers, Ghost Gunner
-
$185.00
- A set of two 1.5” Universal Clamps (including feet, soft jaws, chip fan and mounting hardware) for use with several GG3 / 3-S applications, including: Zero Percent Receivers Optic cuts These clamps will be used for future GG3 cutcode releases, and can also be used for general-purpose custom milling applications as well. These clamps are the same as those used…
- Add to cart
-
-
Sale!
- Ghost Gunner
-
$12.99 Original price was: $12.99.$9.99Current price is: $9.99.
- USB drive containing the latest software for the Ghost Gunner 1 and Ghost Gunner 2. Not compatible with Ghost Gunner 3. Includes cutting codes for completing 80% lowers/frames for the following platforms: AR-15 AR-308 M1911 Polymer80 (PF940C)
- Add to cart
-
-
Sale!
- Ghost Gunner
-
$12.99 Original price was: $12.99.$9.99Current price is: $9.99.
- USB drive containing the latest software for the Ghost Gunner 3. Please note that this item ships with Ghost Gunner 3 orders by default to US customers. Not compatible with GG1 and GG2. Includes cutting codes for completing 80% lowers/frames for the following platforms: AR-15 AR-308 M1911 Polymer80 (PF940C) AK-47 AR-00 Also includes the latest version of DDCut, and Grbl…
- Add to cart